Well, The Mr2 Broke Pretty Bad (Did Not Expect That)

  Ganger 226,613

BoostedBoiz

Måned siden

TheBoostedBoiz.com

Kommentarer
moon dowg
moon dowg 17 dager siden
Kyle you need to do this to the mr2 nopost.info/throw/2s6spWrKp2KId5o/video
Amir Nazir
Amir Nazir 18 dager siden
All the best Bro. hope to see MR2 back in action.
7SENT
7SENT Måned siden
How about lowering the boost? I mean is it really necessary causing potentially irreversible damage then having to start all over from scratch? So y'all are definitely successful no doubt that's been proven but clearly there are just 1 too many minor details that is costing you time and money. If the boost was lowered it would stress the puppy less. And in the event something were to fail it wouldn't be as catastrophic/costly. How much does my opinion matter? None With that being said turn up the boost to the max and continue to gather footage because honestly, whether it's a good day or a not so good day, that's why we're all hear for. Good luck fellas.
Kennith Chapman
Kennith Chapman Måned siden
Like breaking a Honda transmission is a new thing. Comon problem. Replace it with a stronger one. Move on.
Jay James
Jay James Måned siden
We want that world record man set that beast up and get that record you can do it !
New Vintage
New Vintage Måned siden
Didn't expect that? Have you seen your channel at all?
SimonTrent8000
SimonTrent8000 Måned siden
build a fan car under the front of the car.
Aaron Vandervoort
Aaron Vandervoort Måned siden
Be so sweet if you just stuffed a J32 in it
Samuel Foote
Samuel Foote Måned siden
I think riveting a thin sheet metal underneath would cut down so much drag and kill that pocket of air in the front
Ramón Aquino
Ramón Aquino Måned siden
Put tha envelope on the GEO. HONDA MOTOR+VW muffler, and have you self a flying object. Keep up good content BigBoi. DSM#☝
Russell Wallbank
Russell Wallbank Måned siden
Get a set of scales. It will give you a benchmark that you can work from.
Patrick C.
Patrick C. Måned siden
haha the space X tune
crmercer
crmercer Måned siden
time for a Lamborghini nose spoiler
The Dank Digger
The Dank Digger Måned siden
Buusted Boiz ???
Lachlan Sutherland
Lachlan Sutherland Måned siden
Sounds like they took the alternator belt off at the track🤔
SacrosanctRider
SacrosanctRider Måned siden
for sure it was the wheelie, that was wild
Andy Knowles
Andy Knowles Måned siden
12:40 Music at the end? Always hear it, never know if its a full track or just a custom end tune?
watahyahknow
watahyahknow Måned siden
maibe support the front and the rear of the box with an engine plate , that way there isnt any weight hanging off the clutch housing or the driveshafts / diff torquing up the box against the engine plate in the middle , during the wheelie the rear wheels did come off the ground and landed spinning on the sticky stuff , verry good chance the ting was allready broken , goo thing the belt broke , think running that a second time wouldve hurted the gears inside it and probably the shifting mecanism too maibe you can make a deal with fasterprom and trade youre twin system with the header for their single one on the smart car
seanp777
seanp777 Måned siden
Would think the wheelie had some to do with it. If you can, ask Kevin at KSR what you could to make that stronger without going billet. Dude knows his stuff and is part of Cleetus gang.
rjc862003
rjc862003 Måned siden
On the new bell housing before you transplant it I would cnc some gussets up and re·in·force it
Chris Wyman
Chris Wyman Måned siden
Pretty sure slamming the car down hard is what caused the bell housing to crack.
Darth Shaw
Darth Shaw Måned siden
The nut on your shoot release was turning when you were 2 stepping. Idk if its supposed to but incase its not tighten that bitch up lol
Paul Aguirre
Paul Aguirre Måned siden
so how much longer till you quit fuckin around and just get wheelie bars? lol
It's_just_Me!
It's_just_Me! Måned siden
Wheelie bars kyle!!!!
lifted
lifted Måned siden
Does a wheelie bar put you in a different class? Why don't you put one on to control the nose coming up?
Brian Kogan
Brian Kogan Måned siden
Would still love to see it with wheelie bars!!
Still Nissan
Still Nissan Måned siden
3agte is the solution of all yours problems
Dr. Mantis Toboggan
Dr. Mantis Toboggan Måned siden
Please add ducting to the intercooler! My ocd can't take it
Levi Kelley
Levi Kelley Måned siden
6:50, it was at this moment he realized he f***** up
Shifu
Shifu Måned siden
Ruby engine??
Ralph Menta
Ralph Menta Måned siden
I wonder if they make a proximity sensor or radar sensor that would fire down, it would prob be able to record height and arrest spark as needed. Like using a parking sensor but down facing. Seems like it would be way more simple than the laser setup. Lasers are pretty sensitive and I bet they dont like the violent shaking of a drag car. Just an idea.
Omar M
Omar M Måned siden
Wheelie bar . for the trackk.... !!!
Sam Shipley
Sam Shipley Måned siden
Too many ugga duggas on the bell housing
mookie wilson
mookie wilson Måned siden
1. wyatt is a calming and sensible part of chan✅ 2. I really am here to see Leslie bounce off a jetski
Patman Performance
Patman Performance Måned siden
You can go ahead and send me that AEM when you're done with it...I'll put it to good use!
Greg Simon
Greg Simon Måned siden
Race cars always find a weak spot, fix and find another one. Good luck 🍀👍 you guys, love the channel.
Chris Aracena
Chris Aracena Måned siden
Back In the day the bell housing would’ve been done
Rawr Squad
Rawr Squad Måned siden
Can you lighten the rear any like a aftermarket k or tube rear k?
Austin Farr
Austin Farr Måned siden
This was a good time to promote a “ Wyatt get the tool box “ t shirt 😂😂
shartne
shartne Måned siden
move the back wheels back a few inches.
Jason Heller
Jason Heller Måned siden
Holy crap...time for a billet bell-housing/ tube front end 4-link and 9"...lol
Rocket Time
Rocket Time Måned siden
Boostedboiz plz keep it twin turbo I think it has alot more potential even if its compounding off each other I feel it has more
JoseC
JoseC Måned siden
Hi Kyle, you need to make the engine and gearbox part of the roll cage to make a stronger chassis structure. It's like starting from scratch with the chassis but it might be the right way to fix the problem. I hope the MR2 continues on the tracks breaking records
Jason Heller
Jason Heller Måned siden
Should maybe put a heavy-duty splitter on the front like you did on the hatch. You can make it modular to include removable weights. That way the weight would be about as far foward it can get n give u more options as far as the weight you can add or subtract.
Eric Duggins
Eric Duggins Måned siden
I think every youtuber that has a facebook *ding* noise should be demonitized. lol
Hookemups
Hookemups Måned siden
jb weld and go again for the next meet.
Phil Penna
Phil Penna Måned siden
Please do that outro every time. 😂
Jay
Jay Måned siden
Please go to motec it’ll change your life
Colin Clarke
Colin Clarke Måned siden
please keep the twins! just easy on the full sends. dial in the launch first then slowly crank her up. love this build
Justin Plett
Justin Plett Måned siden
Keep your head up Kyle.
Chris Hernandez
Chris Hernandez Måned siden
Bro just fab up some wheelie bars haha
Random
Random Måned siden
Could that bellhousing plate cauce problem? Hard mounting and if it flex it could cause unusual stress to bellhousing?
Ragged Ridez
Ragged Ridez Måned siden
Dont believe 2nd fastest. No way he knows every person out their who has the same setup and is making better or faster passes. Shitty driver
Corrado Racer
Corrado Racer Måned siden
Reviewing the video of the infamous wheelie, I think it was that cause the bell housing to cracked, it landed on that metal plate and had a tiny crack...im pretty sure! Since the 4 tires was off the ground
Corrado Racer
Corrado Racer Måned siden
the "Cursesuader" new name for the mr2. Perhaps its too stiff having that mid-plate on! or just use some bushings at the end so it will give it a lil flexibility! who knows but give it a try...fact is: it was holding several passes, so by throwing a lil bushing will help it may be?
JAY MILLER
JAY MILLER Måned siden
What’s the advantage of a big single over twins?!
hammertyme 561
hammertyme 561 Måned siden
If the mr2 not boost by gear you should try setting that up
get wrecked
get wrecked Måned siden
I wanna see the lude in florida
Adam Honda98
Adam Honda98 Måned siden
Did you ever see the other mr2s hitting faster times take a look dude get some love
David Bieber
David Bieber Måned siden
New to your channel, been watching your early stuff and new stuff. I don’t see Charlie on the newer content. What happened to Charlie? He was OG correct?
William Ventura
William Ventura Måned siden
Why no wheels bars ?
William Ventura
William Ventura Måned siden
Wheelie bars
Smackvttv
Smackvttv Måned siden
You could try to get more support points to the plate maybe to the other half of the trans
BOT BRAD
BOT BRAD Måned siden
Bye Wyatt
Jason Haley
Jason Haley Måned siden
@ 6:38 couldn't tell if he was playin then looked like Wyatt was smiling....guess that was a grimace
kraftaroni
kraftaroni Måned siden
The mid plate should probably be all the way around the bell housing and not just to the bottom? Or is it attached to the top as well? Hope you guys figure it out.
KID,TURBO
KID,TURBO Måned siden
Byyyyyeeeee Wyatt
Armando Rodriguez Jr
Armando Rodriguez Jr Måned siden
Guy sends you a solution for the willy that pulls timing... Kyle: nah I'm going to just keep sending it... Being the first is never easy, and as the good old say goes... failing is the path to success.
Mjr Burn
Mjr Burn Måned siden
As much as you boys have accomplished already I have faith you'll get her back where she needs to be and even faster...
JakeIsWayBlack
JakeIsWayBlack Måned siden
🎶POP UP UP AND DOWN HEADLIGHTS 🎶
sennaBlam
sennaBlam Måned siden
time for wheelie bars
Sargvision831
Sargvision831 Måned siden
Im not trying to look at your face
Sargvision831
Sargvision831 Måned siden
Your in our prayers hoho how
Grim Reaper
Grim Reaper Måned siden
Should've bought a Volvo 🙂
Tristan Miers
Tristan Miers Måned siden
Honestly I’m over mr2 content it’s a cool car but it’s been nothing but it past year and half
Juan Sanchez
Juan Sanchez Måned siden
Someone finally said it!!
Justin Case
Justin Case Måned siden
Two thoughts I've had about keeping the front end down at launch are as follows: 1) If you strictly are adding dead weight to the front, make it so it's a lead slug or ball inside a tube, running as far back the length of the car as you want the weight to end up once you have traveled a particular speed or distance down the track. Maximum weight starts on the nose, but moves backward by g-force as you accelerate, to where you want it, weighing the nose down at the beginning, but sliding backward and being slowed/stopped with some adjustability, generating a force which pulls the nose down at a tunable time, according to where during launch it stops moving rearward, kind of like an automatic, momentary tap of the brakes. Angling the tube from as low as possible in the front, up as high as works best once dialed. Any angular adjustability should add some tunablility and make returning the weight to the front easier. Use springs or shock cord or something to stop and reverse the force and direction of the weight, in a controlled way, moving it back toward the front. Make a ramrod to force the weight the rest of the way forward, from the rear, to ensure it is as far forward as possible at next launch. 2) If you want to maximize the weight you need to add to the front, duct powerful, high CFM/low-weight fan/s in the front compartment, so that it sucks large amounts of air from beneath the car, up through the hood/decklid. Straight at the bottom for maximum suction and slightly raked backward at the hood exit for reduced drag and propulsion. Shut it off after launch and reduce drag by using electric rams to close the metal doors you cut out of the hood for ducting.
Johnny Hurtado
Johnny Hurtado Måned siden
Could’ve done more damage so not really 3 steps back better catch it now than the whole thing blow up on the track
Mi ck
Mi ck Måned siden
If I had to guess I’d say the suspension being upgraded transmitted the shock load of the gear change to the bell housing. The old suspension rubbers would have absorbed some of the shock.
Alan Wrobleski
Alan Wrobleski Måned siden
JB weld it
vippe's garage
vippe's garage Måned siden
I don't get that height sensor hype. Wouldn't it be easier to build wheelie bars and get them to work. Around here even 8,5s street class cars run them and they are FR drivetrain cars (old datsuns, toyotas, volvos and euro fords)
Timendainum
Timendainum Måned siden
Seems to me like a set of wheelie bars would solve the problem.
Thomas Strickland
Thomas Strickland Måned siden
Im sure thats from the wheelie. it bent the chassis then cracked the bell housing.
Zy Tschirhart
Zy Tschirhart Måned siden
Damn, things broke. Love the channel
Zaimoku
Zaimoku Måned siden
I love Wyatt, I miss every time the camera hit him it was “Sup fuckers” 🤣😂
l l
l l Måned siden
FUELTECH is the way🇺🇸
Big D
Big D Måned siden
straight cut gears just singin, i love it
Aus0924
Aus0924 Måned siden
Part 2, swapping everything into the red mr2
NCLocalmedia
NCLocalmedia Måned siden
Are the motor and trans mounts solid? Because if not the mid plate is doing all their jobs and taking 100% of the shock. I would put bushings where it mounts to the chassis.
Addison0526
Addison0526 Måned siden
Does the mr2 have solid engine mounts? If not then that mid plate is basically acting as a solid engine mount and taking all the stress from trying to shoot the car to the moon...
Winston Pratt
Winston Pratt Måned siden
On the twin ebay's is the big thing about those 8's that I find special.....👏👏👏
Taylor Carson
Taylor Carson Måned siden
165 trans split in half and didn't notice that's quality right their
djrepercussion
djrepercussion Måned siden
I’m sure there is a reason, but why not wheelie bars??
Gressi 99
Gressi 99 Måned siden
nopost.info/throw/u56trGmuxYN4iq8/video
Dave Van Gemert
Dave Van Gemert Måned siden
It wasn't caused by the wheelie you bunch of dummies, its was caused by the front end slamming the ground when it came down! Get ahold of me if you have any more questions!!! If you wanna prevent anymore wheelies, grease the rear tires! That's all the tricks I'm gonna share with you without being on payroll "Super Dave"
Nolan Springer
Nolan Springer Måned siden
Should turbo my 06 honda pilot 😂
Westie 4AGE Turbo.
Westie 4AGE Turbo. Måned siden
You are in the middle of the season arent you? If you pull it for the big work now it will be it for the season. Yeah it was the wheelie for sure!
Jay James
Jay James Måned siden
Ok so now is the time to set the mr2 up for the record and shut the h8trz up .
Jacob Preedin
Jacob Preedin Måned siden
Take a page from Cleeter... make a shirt deal out of this boo boo and sell it to support the mr2
T
T Måned siden
"it would have helped" "but it would have taken so much time to get it setup" bro come on all you have is time youtube is your job
baby jake
baby jake Måned siden
Its the lack of knowledge i think. I use to watch this channel alot but it seems like he gets one pass and the car breaks. Every time. A lot of go fast parts buts no knowledge of how there supposed to go together.
Angel Torres
Angel Torres Måned siden
Since the white mr2 will get a different set up, throw the current into the red mr2 lol
Hyde Whyte
Hyde Whyte Måned siden
If it ain't broke, you're not trying.
Eşkıya Dünyaya Hükümdar Olmaz 184. Bölüm
2:31:09
Eşkıya Dünyaya Hükümdar Olmaz
Ganger 4,4 mill
Spårtsklubben #130: Iskald quiz og spark-duell
22:55
Phoenix,she going to throw some fires!!!!!!!
26:22
Allmotorphong Speed
Ganger 60 k
TWIN TURBO MR2 MAKES AN INSANE PASS!
22:51
Twin Turbo J Swapped S14 Gets Boost Pipes!
19:35
Tubing Behind a 500HP JET SKI
17:16
BoostedBoiz
Ganger 397 k
Eşkıya Dünyaya Hükümdar Olmaz 184. Bölüm
2:31:09
Eşkıya Dünyaya Hükümdar Olmaz
Ganger 4,4 mill
Spårtsklubben #130: Iskald quiz og spark-duell
22:55
Off Road 13b Rotary Drift Trike Build!
13:29
Grind Hard Plumbing Co
Ganger 300 k
SNOW TRIKE DRIFT MONSTER
8:02
colinfurze
Ganger 1,1 mill
Living With A Citroen Ami
17:02
Car Throttle
Ganger 440 k